page_banner

Manufacturer professional Thermal Imaging Camera for industry temperature measurement

Highlight:

CA Pro Series Thermal camera Analyzer, upgraded from CA-10 with refined structure,
advanced analysis software and higher sensor resolution,it’s able to detect and measure the
data of object’s temperature changing with time based on the principle of
infrared detection and imaging, store and analyze the reliability of the
measurement results without time limit.

The CA pro mainly apply to the location, detection and maintenance of PCB
leakage, short circuit and open circuit; evaluation and comparison of
smart electronic devices; auxiliary analysis of electronic equipment
performance; temperature control of electronic atomizer; temperature
conduction analysis of heat conducting and radiating materials; uniformity
analysis of materials; heating experiment, thermal simulation and
verification of heating rationality in circuit design; thermal design,thermal
management, etc.

 

 

 

 

 

 

 

 


Product Details

Download

Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Manufacturer professional Thermal Imaging Camera for industry temperature measurement, Any interest, make sure you really feel free to get hold of us. We’re searching forward to forming prosperous enterprise interactions with new purchasers across the earth within the near upcoming.
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for test and measurement professional tools PCB thermal imaging FLIR FLUKE, Due to our dedication, our merchandise are well known throughout the world and our export volume continuously grows every year. We are going to continue to strive for excellence by providing high quality products and solutions that will exceed the expectation of our customers.

Overview

 

CA Pro Series Thermal camera Analyzer, upgraded from CA-10 with refined structure,
advanced analysis software and higher sensor resolution,it’s able to detect and measure the
data of object’s temperature changing with time based on the principle of
infrared detection and imaging, store and analyze the reliability of the
measurement results without time limit.

The CA pro mainly apply to the location, detection and maintenance of PCB
leakage, short circuit and open circuit; evaluation and comparison of
smart electronic devices; auxiliary analysis of electronic equipment
performance; temperature control of electronic atomizer; temperature
conduction analysis of heat conducting and radiating materials; uniformity
analysis of materials; heating experiment, thermal simulation and
verification of heating rationality in circuit design; thermal design,thermal
management, etc.

 

TRANSLATE with x
English

Arabic Hebrew Polish
Bulgarian Hindi Portuguese
Catalan Hmong Daw Romanian
Chinese Simplified Hungarian Russian
Chinese Traditional Indonesian Slovak
Czech Italian Slovenian
Danish Japanese Spanish
Dutch Klingon Swedish
English Korean Thai
Estonian Latvian Turkish
Finnish Lithuanian Ukrainian
French Malay Urdu
German Maltese Vietnamese
Greek Norwegian Welsh
Haitian Creole Persian  


 
TRANSLATE with
COPY THE URL BELOW

Back


EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal
Back

Application

Detection of short circuit and electric leakage of the PCBA

Analysis of the heat dissipation rationality of the PCBA

Evaluation of the thermal conductivity and heat dissipation of materials

Analysis of temperature control of the atomizer heating of electronic cigarettes

Analysis of thermal effect of components

Analysis of heating rate of heating materials

Other analytical applications: Analysis of LED guide plates, quality analysis of optical fiber welding, loading analysis of components…

♦ Specifications:

System parameters

CA-20

CA-30

CA-60

IR resolution

260*200

384*288

640*480

Spectral range

8~14um

NETD

70mK@25℃

50mK@25℃

Angle of visual field

36°X25°

56°X42°

56°X42°

Frame rate

25FPS

Focus mode

Manual focus

Working temperature

-10℃~+55℃

Measurement and analysis
Temperature range

-10℃~450℃

-10℃~550℃

-10℃~550℃

Temperature measurement method

Maximum temperature, minimum temperature and average temperature

Temperature measurement accuracy

±2 or ±2% for -10℃~120℃, and ±3% for 120℃~550℃

Measuring distance

20mm~1m

Temperature correction

Manual/Automatic

Emissivity correction

Adjustable within 0.1-1.0

Data sampling frequency

It can be configured flexibly, such as 20FPS, 10FPS, 5FPS, 1FPS.

Image file

Full-temperature JPG thermogram (Radiometric-JPG)

Video file

MP4

Device dimension
Single board

220mm x 172mm, height of 241mm

Double board

346mm x 220mm, height of 341mm

Data acquisition accessories (not included in standard configuration)
Heating table

Standard configuration of 2 oiling test holes of resistance heating wires, which can be customized

 

Customized adjustment of the simulated suction degree, duration and times of the suction pump

Data acquisition

Recording of temperature data without time limit, including temperature change data, data corresponding to resistance heating wires and resistance values, data corresponding to simulated power supply time and temperature, and calculation of heating uniformity 

 

 

TRANSLATE with x
English

Arabic Hebrew Polish
Bulgarian Hindi Portuguese
Catalan Hmong Daw Romanian
Chinese Simplified Hungarian Russian
Chinese Traditional Indonesian Slovak
Czech Italian Slovenian
Danish Japanese Spanish
Dutch Klingon Swedish
English Korean Thai
Estonian Latvian Turkish
Finnish Lithuanian Ukrainian
French Malay Urdu
German Maltese Vietnamese
Greek Norwegian Welsh
Haitian Creole Persian  


 
TRANSLATE with
COPY THE URL BELOW

Back


EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal
Back

Analysis mode

Circuit board analysis mode

Analysis mode of E-cigarette atomizer

Multi-dimensional analysis mode

Analysis mode of material thermal capacity

Defect analysis mode

Application Scenario

 

Detection and analysis of heat conduction material

        When the heat conduction material conducts heat, different color blocks can be set to view the distribution of heat conduction.

1应用1
1应用2

Analysis of the thermal design of the circuit board

        When the circuit board chip heats up, users can check the components affected by the heat to adjust the layout.

Temperature control analysis of E-cigarette

        Quickly tracking the heating rate and temperature of the atomizer

1应用3
1应用4

Thermal quality analysis of products and components

        The aging degree of the tested components can be analyzed through the simultaneous comparison of the standard samples and the tested samples.

Material heat dissipation analysis

        The heat dissipation of different heat dissipation materials can be analyzed through the temperature color block.

1应用5
1应用6

Circuit board pulse heating analysis

        The thermal analyzer can quickly capture the occasional pulse heat emitted by some components on the circuit board due to failure.

Heating capacity analysis of heating materials at different voltages and currents

        The heating rate, heating efficiency and heating temperature of materials such as heating wire and heating sheet at different voltages and currents can be quantitatively analyzed.

1应用7
1应用8

Analysis of the corresponding relationship between voltage, current and temperature

Location detection of short circuit and leakage

        When repairing the circuit board, the leakage position can be located through the first, second and third high temperature points.

1应用9

Various accessories available

Fixed plate of atomizer test

        Fixed atomizer resistance wire E-liquid injection test. Low resistance connector.

1配件1
1配件2

Automatic heating test bench for atomized electronic cigarettes

        Automatic inhalation stimulation. Supporting the setting of pumping experiment times.

Experiment box

        Simulating the temperature conditions of the equipment in a closed environment. Infrared thermal observation window with the diameter of 4cm. Built-in temperature sensor.

1配件3
1配件4

Power analyzer

        Load voltage and current power analyzer, which can be connected to the analyzers from the specified manufacturers  as required by customers.

Standard normal temperature reference

        50℃ temperature reference for calibrating the accuracy of equipment temperature at normal temperature

1配件5

 

 

CA Pro Series Thermal camera Analyzer, upgraded from CA-10 with refined structure,advanced analysis software and higher sensor resolution, it’s able to detect and measure the data of object’s temperature changing with time based on the principle ofinfrared detection and imaging, store and analyze the reliability of themeasurement results without time limit.

The CA pro mainly apply to the location, detection and maintenance of PCBleakage, short circuit and open circuit; evaluation and comparison ofsmart electronic devices; auxiliary analysis of electronic equipmentperformance; temperature control of electronic atomizer; temperatureconduction analysis of heat conducting and radiating materials; uniformityanalysis of materials; heating experiment, thermal simulation andverification of heating rationality in circuit design; thermal design,thermalmanagement, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us