PriceList for Infrared Thermometer Camera - Infrared Thermal Analyzers CA Pro Series – Dianyang

Highlight:

Product Details

Download

Feedback (2)

Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Handheld Thermal , Imaging Camera , Thermal Imaging , If you are interested in any products, please feel free to contact us for further information or please send us email directly, we will reply you within 24 hours and the best quotation will be provided.

PriceList for Infrared Thermometer Camera - Infrared Thermal Analyzers CA Pro Series – Dianyang Detail:

♦ Overview

CA Pro Series Integrated Thermal Analyzer is able to detect and measure the data of an object’s temperature changing with time based on the principle of infrared detection and imaging, and store and analyze the reliability of the measurement results without time limit.

It is mainly applied in the location, detection and maintenance of PCBA leakage, short circuit and open circuit; the evaluation and comparison of mobile phones or other smart devices; auxiliary analysis of electronic equipment performance; temperature control of electronic atomizer; temperature conduction analysis of heat conducting and radiating materials; uniformity analysis of materials; heating experiment, thermal simulation and verification of heating rationality in circuit design; and thermal design data analysis, etc.

♦ Application

Detection of short circuit and electric leakage of the PCBA

Analysis of the heat dissipation rationality of the PCBA

Evaluation of the thermal conductivity and heat dissipation of materials

Analysis of temperature control of the atomizer heating of electronic cigarettes

Analysis of thermal effect of components

Analysis of heating rate of heating materials

Other analytical applications: Analysis of LED guide plates, quality analysis of optical fiber welding, loading analysis of components…

♦ specification

System parameters	CA-20	CA-30	CA-60
IR resolution	260*200	384*288	640*480
Spectral range	8~14um
NETD	70mK@25℃	50mK@25℃
Angle of visual field	36°X25°	56°X42°	56°X42°
Frame rate	25FPS
Focus mode	Manual focus
Working temperature	-10℃~+55℃
Measurement and analysis
Temperature range	-10℃~450℃	-10℃~550℃	-10℃~550℃
Temperature measurement method	Maximum temperature, minimum temperature and average temperature
Temperature measurement accuracy	±2 or ±2% for -10℃~120℃, and ±3% for 120℃~550℃
Measuring distance	20mm~1m
Temperature correction	Manual/Automatic
Emissivity correction	Adjustable within 0.1-1.0
Data sampling frequency	It can be configured flexibly, such as 20FPS, 10FPS, 5FPS, 1FPS.
Image file	Full-temperature JPG thermogram (Radiometric-JPG)
Video file	MP4
Device dimension
Single board	220mm x 172mm, height of 241mm
Double board	346mm x 220mm, height of 341mm
Data acquisition accessories (not included in standard configuration)
Heating table	Standard configuration of 2 oiling test holes of resistance heating wires, which can be customized
	Customized adjustment of the simulated suction degree, duration and times of the suction pump
Data acquisition	Recording of temperature data without time limit, including temperature change data, data corresponding to resistance heating wires and resistance values, data corresponding to simulated power supply time and temperature, and calculation of heating uniformity

♦ Analysis mode

Circuit board analysis mode

Analysis mode of E-cigarette atomizer

Multi-dimensional analysis mode

Analysis mode of material thermal capacity

Defect analysis mode

♦ Application Scenario

Detection and analysis of heat conduction material

When the heat conduction material conducts heat, different color blocks can be set to view the distribution of heat conduction.

syr (1)
syr (2)

Analysis of the thermal design of the circuit board

When the circuit board chip heats up, users can check the components affected by the heat to adjust the layout.

Temperature control analysis of E-cigarette

Quickly tracking the heating rate and temperature of the atomizer

syr (3)
syr (4)

Thermal quality analysis of products and componentsThe aging degree of the tested components can be analyzed through the simultaneous comparison of the standard samples and the tested samples.

Material heat dissipation analysis

The heat dissipation of different heat dissipation materials can be analyzed through the temperature color block.

syr (5)
syr (6)

Circuit board pulse heating analysis

The thermal analyzer can quickly capture the occasional pulse heat emitted by some components on the circuit board due to failure.

Heating capacity analysis of heating materials at different voltages and currents

The heating rate, heating efficiency and heating temperature of materials such as heating wire and heating sheet at different voltages and currents can be quantitatively analyzed.

syr (7)
syr (8)

Analysis of the corresponding relationship between voltage, current and temperature

Location detection of short circuit and leakage

When repairing the circuit board, the leakage position can be located through the first, second and third high temperature points.

syr (9)

♦ Various accessories available

Fixed plate of atomizer test

Fixed atomizer resistance wire E-liquid injection test. Low resistance connector.

dytr (1)
dytr (2)

Automatic heating test bench for atomized electronic cigarettes

Automatic inhalation stimulation. Supporting the setting of pumping experiment times.

Experiment box

Simulating the temperature conditions of the equipment in a closed environment. Infrared thermal observation window with the diameter of 4cm. Built-in temperature sensor.

dytr (3)
dytr (4)